ILI HYRER/HYREL
GASCADE Gastransport GmbH · Kassel, Hessen
Aktenzeichen 2026-048veröffentlicht 20.10.2026Dienstleistungen · Verhandlungsverfahren mit Teilnahmewettbewerb
Teilnahmefristin 16 Tagen · Fragen bis 06.11.2026, 23:59 Uhr
Auf einen Blick
- Art des Auftrags
- Dienstleistungen
- Geschätzter Wert
- ?keine Angabe
- Laufzeit
- ?keine Angabe
- Lose
- 16Angebot auf bis zu 16
- Verfahren
- Verhandlungsverfahren mit TeilnahmewettbewerbSektVO, EU-weit
- Rahmenvereinbarung
- nein
- Ort der Leistung
- Kassel34119, Hessen
- Einreichung
- elektronisch: Erforderlichsatellite.dtvp.de
Schnellprüfung für Bieter
- Unterlagen frei zugänglichja
- Elektronische Einreichung verpflichtendja
- Nebenangebote zugelassenja
- Mehrere Hauptangebote zugelassennein
- Laut Auftraggeber für KMU geeignetja
- Sicherheiten verlangtnein
- Teilnahme vorbehalten (z. B. Werkstätten)nein
- ?E-Rechnung verpflichtendkeine Angabe
- ?Vertraulichkeitserklärung verlangtkeine Angabe
- Elektronische Auktionnein
- Aus EU-Mitteln finanziertnein
- ?Wiederkehrender Auftragkeine Angabe
Angaben für Los 1. Die Lose haben unterschiedliche Bedingungen, siehe Bedingungen.
Einordnungvon uns ausgewertet
Wer darf bieten?
Zuerst bewerben sich Unternehmen mit einem Teilnahmeantrag, danach geben ausgewählte Bewerber Angebote ab.
Wird verhandelt?
Über Inhalt und Preis der Angebote kann verhandelt werden. Oft behält sich die Vergabestelle vor, den Zuschlag ohne Verhandlung zu erteilen: Das erste Angebot sollte dann schon das letzte sein.
Was jetzt zu tun ist
Teilnahmeantrag bis zur Teilnahmefrist einreichen und das Erstangebot so kalkulieren, als gäbe es keine Verhandlungsrunde.
Die Gewichtung von Preis und Leistung steht nicht in der Bekanntmachung, nur in den Vergabeunterlagen.
Unterlagen schon heruntergeladen? Vergabeunterlagen prüfen (Team): Fristen, Gewichtung, Mengen, Zertifikate und Fehler im Preisblatt.
Fristen und TermineStand 03.11.2026Alle in den Kalender
- Veröffentlichungvor 14 Tagen
- Heute
- Fragen bis 23:59 Uhrin 3 Tagenan GASCADE Gastransport GmbH
- Teilnahmeanträge bis 12:00 Uhrin 16 Tagen
Beschreibung
The purpose of the project is In-Line Inspection (ILI) for pipeline technical condition assessment prior to the transition from natural gas (NG) to hydrogen operation.
Gegenstand nach CPV
- 76600000Überwachung von RohrleitungenHauptgegenstand
Lose16 Lose · Angebot auf bis zu 16
| Los | Gegenstand | Laufzeit | Geschätzter Wert |
|---|---|---|---|
| 1 | Cleaning and gauging (HYRER/HYREL) For the pipeline sections 1 to 3 mechanical cleaning using i.e. bi-directional cleaning pigs is considered. Four (4) cleaning pig runs shall be assumed to be required per pipeline section. For the very first cleaning pig run per section a bi-directional pig must be offered which shall proof pig passage by either mechanical or intelligent gauge plate(s). | – | – |
| 2 | Mapping (HYRER/HYREL) For the pipeline sections 1 to 3 mapping of the pipeline is considered over the entire section or a to be determined sub-section of it. A minimum of twenty (20) AGMs must be provided per section. Inertial measurement data are considered for bending strain analysis which shall be offered as a combined service. For the pipeline sections 1 to 3 the following pipeline anomalies shall be addressed by ILI technologies: | – | – |
| 3 | Internal and external metal-loss anomalies (HYRER/HYREL) Offered services shall consider internal and external metal-loss detection and sizing in straight pipe, field- and hot-bends. In case a combination of ILI technologies implemented on one or more ILI tools which enable a combined data analysis leading to a superior perfor-mance compared to individual ILI technologies, the technologies shall be offered as a com-bined service and shall be emphasized as such. | – | – |
| 4 | Dents, ovalities and roof topping (HYRER/HYREL) Offered services shall consider detection and sizing of geometric deviations from the norm of straight pipe and in bends. | – | – |
| 5 | Axial cracking and crack-like anomalies (HYRER/HYREL) Offered services shall consider detection and sizing of axially oriented crack and crack-like anomalies. The definition of terms is according to the publicly available Pipeline Operators Forum Recommended Practice POF 100 edition 2021. | – | – |
| 6 | Pipe material hardness variation (HYRER/HYREL) Offered services shall consider detection and sizing of localized variations of the pipe materi-al hardness with respect to the mean material hardness per joint and exceeding an upper and lower bound threshold depending on the offered tool performance. | – | – |
| 7 | Pipe material type variation (HYRER/HYREL) Offered services shall consider detection of pipe material yield strength variation per joint with respect to available pipe material records per joint. | – | – |
| 8 | Axial strain (HYRER/HYREL) Offered services shall consider measurement of the axial strain along the entire section lengths. The service shall be offered as a combined service of ILI, strain-based Fitness-For-Service assessment and, if possible, a total strain assessment including bending strain as-sessment results (see Lot 2). Pipe samples and pipe sample data can be provided upfront if needed to enhance the offered performance. | – | – |
| 9 | Cleaning and gauging (HYRER Loop) For pipeline section 4 mechanical cleaning using i.e. bi-directional cleaning pigs is consid-ered. Four (4) cleaning pig runs shall be assumed to be required per pipeline section. For the very first cleaning pig run per section a bi-directional pig must be offered which shall proof pig passage by either mechanical or intelligent gauge plate(s). | – | – |
| 10 | Mapping (HYRER Loop) For pipeline section 4 mapping the pipeline is considered over the entire section or a to be determined sub-section of it. A minimum of twenty (20) AGMs must be provided. Inertial measurement data are considered for bending strain analysis which shall be offered as a combined service. | – | – |
| 11 | Internal and external metal-loss anomalies (HYRER Loop) Offered services shall consider internal and external metal-loss detection and sizing in straight pipe, field- and hot-bends. In case a combination of ILI technologies implemented on one or more ILI tools which enable a combined data analysis leading to a superior perfor-mance compared to individual ILI technologies, the technologies shall be offered as a com-bined service and shall be emphasized as such. | – | – |
| 12 | Dents, ovalities and roof topping (HYRER Loop) Offered services shall consider detection and sizing of geometric deviations from the norm of straight pipe and in bends. | – | – |
| 13 | Axial cracking and crack-like anomalies (HYRER Loop) Offered services shall consider detection and sizing of axially oriented crack and crack-like anomalies. The definition of terms is according to the publicly available Pipeline Operators Forum Recommended Practice POF 100 edition 2021. | – | – |
| 14 | Pipe material hardness variation (HYRER Loop) Offered services shall consider detection and sizing of localized variations of the pipe materi-al hardness with respect to the mean material hardness per joint and exceeding an upper and lower bound threshold depending on the offered tool performance. | – | – |
| 15 | Pipe material type variation (HYRER Loop) Offered services shall consider detection of pipe material yield strength variation per joint with respect to available pipe material records per joint. | – | – |
| 16 | Axial strain (HYRER Loop) Offered services shall consider measurement of the axial strain along the entire section lengths. The service shall be offered as a combined service of ILI, strain-based Fitness-For-Service assessment and, if possible, a total strain assessment including bending strain as-sessment results (see Lot 10). Pipe samples and pipe sample data can be provided upfront if needed to enhance the offered performance. | – | – |
Bedingungen2 Gruppen von Losen
Lose 1, 2, 3, 4, 5, 6, 7, 8
Zuschlag0 von 1 angegeben
- Kriterien
- ?keine Angabe
Eignung11 von 11 angegeben
- Eintragung in das Handelsregister
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is … ganz lesenkürzer
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.- Eintragung in das Handelsregister
- PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
- Eintragung in das Handelsregister
- PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
- Eintragung in das Handelsregister
- PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
- Spezifischer Jahresumsatz
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for … ganz lesenkürzer
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.- Berufliche Risikohaftpflichtversicherung
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, propert … ganz lesenkürzer
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.- Referenzen zu bestimmten Dienstleistungen
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To dem … ganz lesenkürzer
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To demonstrate comparability, references must contain at least the following infor-mation: 1. Reference title 2. Client (If the client may not be named for data protection reasons, it is sufficient to categorize the client (research, industry, other sectors of the contracting enti-ty) and to confirm that the reference is comparable to the tendered service.) 3. Contact person incl. contact details (e.g., e-mail, telephone number) (If the contact person may not be named for data protection reasons, it is suffi-cient to categorize the client (research, industry, other sectors client) and con-firm that the reference is comparable to the tendered service.) 4. Brief description of the ILI service(s) performed 5. Inspected pipeline section outer diameter 6. Nominal wall thickness 7. Seamweld type 8. Length 9. Pipeline medium 10. Medium flow conditions 11. Mean operating pressure during inspection 12. Order value in EUR (net) 13. Execution period Minimum requirement (failure to meet will result in exclusion): There are at least 2 relevant (comparable) references per Lot and ILI service. Refer to Attachment A.1 Forms and Certificates (Eligibility), Form 7.- Zertifikate von unabhängigen Stellen über Qualitätssicherungsstandards
- TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent must be submitted. Refer to Attachment A.1 Forms and Certificates (Eligibility), Proof 3.
- Nachreichen von Unterlagen
- Die Nachforderung von Erklärungen, Unterlagen und Nachweisen ist nicht ausgeschlossen.
- Ausschlussgründe
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Vers … ganz lesenkürzer
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Verstöße gegen Verpflichtungen zur Zahlung von Steuern oder Abgaben, Verstöße gegen Verpflichtungen zur Zahlung von Sozialversicherungsbeiträgen, Verstöße gegen umweltrechtliche Verpflichtungen, Verstöße gegen sozialrechtliche Verpflichtungen, Verstöße gegen arbeitsrechtliche Verpflichtungen, Zahlungsunfähigkeit, Insolvenz, Einstellung der beruflichen Tätigkeit, Mit Insolvenz vergleichbares Verfahren, Schwere Verfehlung, Wettbewerbsbeschränkende Vereinbarungen, Interessenkonflikt, Wettbewerbsverzerrung wegen Vorbefassung, Mangelhafte Erfüllung eines früheren öffentlichen Auftrags, Täuschung oder unzulässige Beeinflussung des Vergabeverfahrens- Begrenzung der Bewerberzahl
- 3 bis … Bewerber
Laufzeit und Umfang1 von 5 angegeben
- Vertragsbeginn
- ?keine Angabe
- Vertragsende
- ?keine Angabe
- Verlängerung
- ?keine Angabe
- Optionen
- ?keine Angabe
- Rahmenvereinbarung
- nein
Angebot und Einreichung7 von 9 angegeben
- Elektronische Einreichung
- Erforderlich
- Einreichung über
- satellite.dtvp.de
- Sprache
- Deutsch, Englisch
- Nebenangebote
- Zulässig
- Mehrere Hauptangebote
- Nicht zulässig
- Elektronischer Katalog
- Nicht zulässig
- Bindefrist
- ?keine Angabe
- Angebotsöffnung
- ?keine Angabe
- Sicherheiten
- nicht verlangt
Ausführung5 von 7 angegeben
- Ausführungsbedingungen
- Leistung: see tender documents
- Vertraulichkeit
- ?keine Angabe
- E-Rechnung
- ?keine Angabe
- Elektronische Bestellung
- wird nicht genutzt
- Elektronische Zahlung
- wird nicht genutzt
- Vorbehaltene Ausführung
- Nein
- EU-Mittel
- Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert
Rechtsschutz3 von 3 angegeben
- Nachprüfungsstelle
- Vergabekammer des Bundes, Villemombler Straße 76, 53123 Bonn
- Fristen für Nachprüfungsanträge
The tender documents must be checked by the interested companies for completeness and legibility upon receipt/download. If the contract notice, the tender documents or any other documents or information communicated, handed over or made accessible to the applicants/tenderers contain ambiguities or … ganz lesenkürzer
The tender documents must be checked by the interested companies for completeness and legibility upon receipt/download. If the contract notice, the tender documents or any other documents or information communicated, handed over or made accessible to the applicants/tenderers contain ambiguities or violate applicable law, the applicants/tenderers are obliged to notify the contracting authority immediately. Unresolved ambiguities must be considered by the applicants/tenderers as risks to be accounted for in their offers. Any procedural complaints (in German: Rügen) must be clearly marked as such. Applicants/tenderers are expressly reminded of their obligation to raise complaints under § 160 (3) GWB. Furthermore, the contracting authority expressly points out the legal remedy deadline under § 160 (3) sentence 1 no. 4 GWB. According to this, a request for review (in German: Nachprüfungsantrag) is inadmissible if more than 15 calendar days have passed since receipt of the contracting authority"s notification that it does not intend to remedy the complaint.- Beschaffungsübereinkommen (GPA)
- fällt darunter
Zusätzliche Informationen2 von 2 angegeben
- Hinweis
#Besonders auch geeignet für:other-sme# The following NPS 32-in (DN 800) pipeline sections are considered: Section 1 Outer diameter (mm): 813 Length (km): 57 Nominal pipe wall thickness (mm): 11.9 Pipe material: StE 480.7 TM Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius … ganz lesenkürzer
#Besonders auch geeignet für:other-sme# The following NPS 32-in (DN 800) pipeline sections are considered: Section 1 Outer diameter (mm): 813 Length (km): 57 Nominal pipe wall thickness (mm): 11.9 Pipe material: StE 480.7 TM Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius: ? 3 × D Max. bend curvature (degrees): 90 ILI NG operating pressure (bar): 50 ? OP ? 80 ILI NG velocity (m/s): 0.5 ? v ? 4 Location launch/receive site: Germany, onshore Section 2 Outer diameter (mm): 813 Length (km): 158 Nominal pipe wall thickness (mm): 11.9 Pipe material: StE 480.7 TM Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius: ? 3 × D Max. bend curvature (degrees): 90 ILI NG operating pressure (bar): 50 ? OP ? 80 ILI NG velocity (m/s): 0.5 ? v ? 4 Location launch/receive site: Germany, onshore Section 3 Outer diameter (mm): 813 Length (km): 210 Nominal pipe wall thickness (mm): 11.9 Pipe material: StE 480.7 TM Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius: ? 3 × D Max. bend curvature (degrees): 90 ILI NG operating pressure (bar): 50 ? OP ? 80 ILI NG velocity (m/s): 0.5 ? v ? 4 Location launch/receive site: Germany, onshore Reporting timeline The following number of working days, calculated from two (2) days after tool receive and acceptance of the run, shall be considered for reporting: Section 1 Data quality report: 10 Preliminary report: 30 Final report: 40 Section 2 Data quality report: 10 Preliminary report: 30 Final report: 60 Section 3 Data quality report: 10 Preliminary report: 30 Final report: 60 In case the above-mentioned reporting timelines cannot be met, the most expedited reporting schedule shall be offered and parameters influencing the offered schedule must be stated.- Hinweis
#Bekanntmachungs-ID: CXVHYH0DYYD6T4L4# Contract award on the initial offer: The contracting authority may award the contract on the basis of the initial tender without conducting negotiations. The decision on this matter is at the discretion of the contracting authority in accordance with the tend … ganz lesenkürzer
#Bekanntmachungs-ID: CXVHYH0DYYD6T4L4# Contract award on the initial offer: The contracting authority may award the contract on the basis of the initial tender without conducting negotiations. The decision on this matter is at the discretion of the contracting authority in accordance with the tender documents. Further information can be found in the tender documents. Combination of lots: Tenders may be submitted for several lots. The contracting authority reserves the right to award such combined tenders as a single contract, provided that this is economically viable in accordance with the objective and non-discriminatory criteria set out in the tender documents. Further information can be found in the tender documents.
Lose 9, 10, 11, 12, 13, 14, 15, 16
Zuschlag0 von 1 angegeben
- Kriterien
- ?keine Angabe
Eignung11 von 11 angegeben
- Eintragung in das Handelsregister
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is … ganz lesenkürzer
PL1: Proof of registration in the professional or commercial register - PL1: A proof of registration in the professional or commercial register must be at-tached in accordance with the legal provisions of the country in which the tenderer is based (in unverified copy), provided that the tenderer is registered in the professional or commercial register. In case of non-registration: The submission of a business registration (for foreign tenderers: or equivalent). The proof must identify at least the persons authorized to represent the company. The proof may be submitted in (non-certified) photocopy/photocopy (PDF), but must be clearly legible and formulated in German or English (if necessary, translated). The proof must not be older than 12 months at the time of publication of this announce-ment. Refer to Attachment A.1 Forms and Proofs (Suitability), Proof 1.- Eintragung in das Handelsregister
- PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB - PL2: Declaration of the absence of grounds for exclusion according to sections 123 and 124 GWB. Proof of self-cleaning measures in accordance with section 125 GWB is possible. See Attachment A.1 Forms and Certificates (Suitability), Form 3.1 (or Form 3.2).
- Eintragung in das Handelsregister
- PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). - PL3: Self-declaration on Regulation (EU) 2022/576 (Sanctions against Russia). See Attachment A.1 Forms and Certificates (Suitability), Form 8.
- Eintragung in das Handelsregister
- PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. - PL4: Self-declaration of compliance with the pledge to adhere to collective agree-ments. See Attachment A.1 Forms and Certificates (Suitability), Form 9 (or Form 10).
- Spezifischer Jahresumsatz
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for … ganz lesenkürzer
WL1: Self-declaration on the average annual revenue - WL1: Self-declaration on the annual revenue of the company in the last 3 (three) completed financial years, insofar as this relates to services that are compara-ble to the service to be awarded. If a company has not been active on the market for three years, it shall provide a business plan for the missing years, stating the expected annual revenue. Minimum requirement (failure to meet will result in exclusion): The annual revenue in EUR (net) for each of the last 3 (three) completed fi-nancial years, broken down by lot, must be for Lot 1, at least 480.000,00 EUR. for Lot 2, at least 100.000,00 EUR. for Lot 3, at least 1.300.000,00 EUR. for Lot 4, at least 500.000,00 EUR. for Lot 5, at least 10.000.000,00 EUR. for Lot 6, at least 900.000,00 EUR. for Lot 7, at least 700.000,00 EUR. for Lot 8, at least 900.000,00 EUR. for Lot 9, at least 160.000,00 EUR. for Lot 10, at least 50.000,00 EUR. for Lot 11, at least 200.000,00 EUR. for Lot 12, at least 150.000,00 EUR. for Lot 13, at least 1.000.000,00 EUR. for Lot 14, at least 220.000,00 EUR. for Lot 15, at least 160.000,00 EUR. for Lot 16, at least 220.000,00 EUR. If the applicant wishes to submit a tender for several lots, the minimum requirements must be met cumulatively. This means that, for a tender covering all 16 lots, evidence of an annual revenue of EUR 17.040.000,00 (net) must be provided for each of the last three (3) completed financial years. Refer to Attachment A.1 Forms and Certificates (Suitability), Form 6.- Berufliche Risikohaftpflichtversicherung
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, propert … ganz lesenkürzer
WL2: Proof of existing professional or business liability insurance or comparable market-standard insurance for personal injury, property and financial damages. - WL2: Proof of existing professional or business liability insurance or comparable mar-ket-standard insurance for personal injury, property and financial damages. Minimum requirement (failure to meet will result in exclusion): The amount of liability cover for personal injury, property damage and financial loss must be at least EUR 10 million per insurance year. If insurance with these coverage levels does not currently exist, it is sufficient to sub-mit 1. a self-declaration by the tenderer that it is prepared to take out ap-propriate insurance at the first request of the contracting entity in the event of a contract award and 2. an irrevocable declaration by an insurer (in non-verified copy) that it is willing to take out the corresponding insurance. The proof can be presented in photocopy/photocopy (PDF), but must be clearly legi-ble. The proof must not be older than 12 months at the time of the expiry of the dead-line for submitting offers. Refer to Attachment A.1 Forms and proof (suitability), Proof 2.- Referenzen zu bestimmten Dienstleistungen
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To dem … ganz lesenkürzer
TL1: References - TL1: Information on the performance of relevant and comparable services (refer-ences) in the last six (6) years since the publication of the announcement. The refer-ence must be comparable to the service to be contracted here in terms of type, scope and level of difficulty. To demonstrate comparability, references must contain at least the following infor-mation: 1. Reference title 2. Client (If the client may not be named for data protection reasons, it is sufficient to categorize the client (research, industry, other sectors of the contracting enti-ty) and to confirm that the reference is comparable to the tendered service.) 3. Contact person incl. contact details (e.g., e-mail, telephone number) (If the contact person may not be named for data protection reasons, it is suffi-cient to categorize the client (research, industry, other sectors client) and con-firm that the reference is comparable to the tendered service.) 4. Brief description of the ILI service(s) performed 5. Inspected pipeline section outer diameter 6. Nominal wall thickness 7. Seamweld type 8. Length 9. Pipeline medium 10. Medium flow conditions 11. Mean operating pressure during inspection 12. Order value in EUR (net) 13. Execution period Minimum requirement (failure to meet will result in exclusion): There are at least 2 relevant (comparable) references per Lot and ILI service. Refer to Attachment A.1 Forms and Certificates (Eligibility), Form 7.- Zertifikate von unabhängigen Stellen über Qualitätssicherungsstandards
- TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent - TL2: Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent. Minimum requirement (failure to meet will result in exclusion): Proof of valid certification in accordance with DIN EN ISO 9001 or equivalent must be submitted. Refer to Attachment A.1 Forms and Certificates (Eligibility), Proof 3.
- Nachreichen von Unterlagen
- Die Nachforderung von Erklärungen, Unterlagen und Nachweisen ist nicht ausgeschlossen.
- Ausschlussgründe
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Vers … ganz lesenkürzer
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Verstöße gegen Verpflichtungen zur Zahlung von Steuern oder Abgaben, Verstöße gegen Verpflichtungen zur Zahlung von Sozialversicherungsbeiträgen, Verstöße gegen umweltrechtliche Verpflichtungen, Verstöße gegen sozialrechtliche Verpflichtungen, Verstöße gegen arbeitsrechtliche Verpflichtungen, Zahlungsunfähigkeit, Insolvenz, Einstellung der beruflichen Tätigkeit, Mit Insolvenz vergleichbares Verfahren, Schwere Verfehlung, Wettbewerbsbeschränkende Vereinbarungen, Interessenkonflikt, Wettbewerbsverzerrung wegen Vorbefassung, Mangelhafte Erfüllung eines früheren öffentlichen Auftrags, Täuschung oder unzulässige Beeinflussung des Vergabeverfahrens- Begrenzung der Bewerberzahl
- 3 bis … Bewerber
Laufzeit und Umfang1 von 5 angegeben
- Vertragsbeginn
- ?keine Angabe
- Vertragsende
- ?keine Angabe
- Verlängerung
- ?keine Angabe
- Optionen
- ?keine Angabe
- Rahmenvereinbarung
- nein
Angebot und Einreichung7 von 9 angegeben
- Elektronische Einreichung
- Erforderlich
- Einreichung über
- satellite.dtvp.de
- Sprache
- Deutsch, Englisch
- Nebenangebote
- Zulässig
- Mehrere Hauptangebote
- Nicht zulässig
- Elektronischer Katalog
- Nicht zulässig
- Bindefrist
- ?keine Angabe
- Angebotsöffnung
- ?keine Angabe
- Sicherheiten
- nicht verlangt
Ausführung5 von 7 angegeben
- Ausführungsbedingungen
- Leistung: see tender documents
- Vertraulichkeit
- ?keine Angabe
- E-Rechnung
- ?keine Angabe
- Elektronische Bestellung
- wird nicht genutzt
- Elektronische Zahlung
- wird nicht genutzt
- Vorbehaltene Ausführung
- Nein
- EU-Mittel
- Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert
Rechtsschutz3 von 3 angegeben
- Nachprüfungsstelle
- Vergabekammer des Bundes, Villemombler Straße 76, 53123 Bonn
- Fristen für Nachprüfungsanträge
The tender documents must be checked by the interested companies for completeness and legibility upon receipt/download. If the contract notice, the tender documents or any other documents or information communicated, handed over or made accessible to the applicants/tenderers contain ambiguities or … ganz lesenkürzer
The tender documents must be checked by the interested companies for completeness and legibility upon receipt/download. If the contract notice, the tender documents or any other documents or information communicated, handed over or made accessible to the applicants/tenderers contain ambiguities or violate applicable law, the applicants/tenderers are obliged to notify the contracting authority immediately. Unresolved ambiguities must be considered by the applicants/tenderers as risks to be accounted for in their offers. Any procedural complaints (in German: Rügen) must be clearly marked as such. Applicants/tenderers are expressly reminded of their obligation to raise complaints under § 160 (3) GWB. Furthermore, the contracting authority expressly points out the legal remedy deadline under § 160 (3) sentence 1 no. 4 GWB. According to this, a request for review (in German: Nachprüfungsantrag) is inadmissible if more than 15 calendar days have passed since receipt of the contracting authority"s notification that it does not intend to remedy the complaint.- Beschaffungsübereinkommen (GPA)
- fällt darunter
Zusätzliche Informationen2 von 2 angegeben
- Hinweis
#Besonders auch geeignet für:other-sme# The following NPS 40-in (DN 1000) pipeline section is considered: Section 4 Outer diameter (mm): 1016 Length (km): 97 Nominal pipe wall thickness (mm): 14.6 Pipe material: L 485 MB Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius: ? … ganz lesenkürzer
#Besonders auch geeignet für:other-sme# The following NPS 40-in (DN 1000) pipeline section is considered: Section 4 Outer diameter (mm): 1016 Length (km): 97 Nominal pipe wall thickness (mm): 14.6 Pipe material: L 485 MB Primary factory weld type: Longitudinal Weld type: DSAW Min. bend radius: ? 3 × D Max. bend curvature (degrees): 90 ILI NG operating pressure (bar): 50 ? OP ? 80 ILI NG velocity (m/s): 0.5 ? v ? 4 Location launch/receive site: Germany, onshore Reporting timeline The following number of working days from two (2) days after tool receive and acceptance of the run shall be considered for reporting: Section 4 Data quality report: 10 Preliminary report: 30 Final report: 40 In case the above-mentioned reporting timelines cannot be met, the most expedited reporting schedule shall be offered and parameters influencing the offered schedule must be stated.- Hinweis
#Bekanntmachungs-ID: CXVHYH0DYYD6T4L4# Contract award on the initial offer: The contracting authority may award the contract on the basis of the initial tender without conducting negotiations. The decision on this matter is at the discretion of the contracting authority in accordance with the tend … ganz lesenkürzer
#Bekanntmachungs-ID: CXVHYH0DYYD6T4L4# Contract award on the initial offer: The contracting authority may award the contract on the basis of the initial tender without conducting negotiations. The decision on this matter is at the discretion of the contracting authority in accordance with the tender documents. Further information can be found in the tender documents. Combination of lots: Tenders may be submitted for several lots. The contracting authority reserves the right to award such combined tenders as a single contract, provided that this is economically viable in accordance with the objective and non-discriminatory criteria set out in the tender documents. Further information can be found in the tender documents.
Keine Angabe passt zu diesem Suchbegriff.
Bezeichnungen aus den amtlichen eForms-Codelisten (EU und eForms-DE). Maßgeblich sind die Vergabeunterlagen.
AuftraggeberAlle Verfahren dieses Auftraggebers
- Name
- GASCADE Gastransport GmbH
- Art
- Erzeugung, Fortleitung oder Abgabe von Gas oder Wärme
- Anschrift
- Kölnische Str. 108-112, 34119 Kassel
- Website
- gascade.de
- Kontakt
- vergabe@
gascade.de
Bei uns erfasst
23Bekanntmachungen
7Zuschlagsmeldungen
- Evakuierungsarbeiten von Pipelines zum Gastransport, Abfackeln von Restmengen, Inertisieren von Pipelines zum Gastransport Im Rahmen einer nicht abschließenden Rahmenvereinbarung29.10.2026
- Lieferung mobile Verdichter und Gasgenerator zum Antrieb von mobilen Verdichtern21.10.2026 · 2 Angebote
- Unterhaltsreinigung Verwaltungsgebäude18.10.2026
- Rohrleitungsmaterial AS Wittenburg / GDRM Lampertheim09.04.2026
Marktumfeldvon uns ausgewertet
Für CPV 766 (Überwachung von Rohrleitungen) in Hessen gibt es in den letzten 24 Monaten keine Vergabemeldung. Kennzahlen zeigen wir ab 10.
Preise und WettbewerbPremium
Quelle: Bekanntmachungsservice des Bundes (oeffentlichevergabe.de), Lizenz CC0. Stand der Daten: 02.11.2026. Maßgeblich ist allein die Originalbekanntmachung. Kennung bd8b9eae-b195-4f4b-92e3-91945010d959.