Accelerator Control System Engineering Support
FAIR - Facility for Antiproton and Ion Research in Europe GmbH · Darmstadt, Hessen
Aktenzeichen 27/2600032013FAIRveröffentlicht 03.12.2025erstmals 03.12.2025LieferleistungenVerhandlungsverfahren mit Teilnahmewettbewerb
- Laufzeit
- 24 Monate
- bis zu 1 Verlängerung
- Leistungsart
- Lieferleistungen
Dieses Verfahren ist abgeschlossen oder älter. Die Seite bleibt zur Information erreichbar.
Auf einen Blick
- Art des Auftrags
- Lieferleistungen
- Geschätzter Wert
- ?keine Angabe
- Laufzeit
- 24 Monatebis zu 1 Verlängerung
- Lose
- 1
- Verfahren
- Verhandlungsverfahren mit TeilnahmewettbewerbVgV, EU-weit
- Rahmenvereinbarung
- nein
- Einreichung
- elektronisch: Erforderlichdtvp.de
Schnellprüfung für Bieter
- Unterlagen frei zugänglichja
- Elektronische Einreichung verpflichtendja
- Nebenangebote zugelassennein
- Mehrere Hauptangebote zugelassennein
- Laut Auftraggeber für KMU geeignetja
- Sicherheiten verlangtnein
- Teilnahme vorbehalten (z. B. Werkstätten)nein
- E-Rechnung verpflichtendja
- ?Vertraulichkeitserklärung verlangtkeine Angabe
- Elektronische Auktionnein
- Aus EU-Mitteln finanziertnein
- ?Wiederkehrender Auftragkeine Angabe
Einordnungvon uns ausgewertet
Zuerst bewerben sich Unternehmen mit einem Teilnahmeantrag, danach geben ausgewählte Bewerber Angebote ab.
Über Inhalt und Preis der Angebote kann verhandelt werden. Oft behält sich die Vergabestelle vor, den Zuschlag ohne Verhandlung zu erteilen: Das erste Angebot sollte dann schon das letzte sein.
Teilnahmeantrag bis zur Teilnahmefrist einreichen und das Erstangebot so kalkulieren, als gäbe es keine Verhandlungsrunde.
Bei dieser Vergabestelle vergehen von der ersten Meldung bis zum Ergebnis im Mittel 62 Tage (33 Verfahren, 24 Monate).
Sie erhält im Median 2 Angebote je Los (70 Lose mit Angabe).
Die Gewichtung von Preis und Leistung steht nicht in der Bekanntmachung, nur in den Vergabeunterlagen.
Unterlagen schon heruntergeladen? Vergabeunterlagen prüfen (Team): Fristen, Gewichtung, Mengen, Zertifikate und Fehler im Preisblatt.
Fristen und TermineStand 08.11.2026
- Erstveröffentlichungvor 11 Monaten
- 1. Berichtigung (diese Fassung)vor 11 Monaten
- Fragen bis 23:59 Uhrvor 10 Monatenan FAIR - Facility for Antiproton and Ion Research in Europe GmbH
- Teilnahmeanträge bis 11:00 Uhrvor 10 Monaten
- Heute
Beschreibung
Development, production and delivery of specialised electronic software and few hardware for the control, data acquisition and monitoring of the accelerators. All these components need full software integration into the FAIR accelerator control system. Further, the services include upgrade of already existing operational systems. The services are expected to be delivered within a period of 24 months.
For the construction of the first facility section of FAIR, special hardware and electronic components are required on the one hand, as well as support services for software integration into the accelerator's control system and beam diagnostic system. The hardware and software integration serves to ensure compatibility with the very complex and specific control system standards of the FAIR accelerator and is a main component of the scope of delivery. This includes the extension or development of so-called FESA classes with integrated LSA data supply by the accelerator control system as well as the connection to the campus-wide timing system based on a white-rabbit real-time network. In this context, special electronic and mechanical components are to be supplied, as well as programming and support services
Beschreibung des Loses
According to the detailed specifications, few hardware equipment and mechanical actuators have to be customized, manufactured and tested as well as in majority engineering and programming of specialized System Software has to be upgraded or newly designed. Also Support for Hardware and Software Integration into the FAIR systems is required.
Gegenstand nach CPV
- 42961000Steuerungs- und KontrollsystemHauptgegenstand
- 30232700Zentrale Steuerungseinheit
- 31712110Elektronische integrierte Schaltungen und Mikrobausteine
- 38424000Mess- und Steuergeräte
- 48960000Treiber- und Systemsoftwarepaket
- 72211000Programmierung von System- und Anwendersoftware
- 72212960Entwicklung von Treiber- und Systemsoftware
Bedingungen
Zuschlag0 von 1 angegeben
- Kriterien
- ?keine Angabe
Eignung11 von 11 angegeben
- Referenzen zu bestimmten Arbeiten
III. Description of reference projects (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Description of three comparable reference projects, including the project data asked for on the FAIR preprinted form. With the following minimum requirements to the references: At least 3 references from the l … ganz lesenkürzer
III. Description of reference projects (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Description of three comparable reference projects, including the project data asked for on the FAIR preprinted form. With the following minimum requirements to the references: At least 3 references from the last 5 years which are described in detail and proof the following experiences: a) In-depth knowledge of Linux operating systems, including real-time extensions at Expert Level b) Specific expertise in yocto and creating custom Linux distributions for embedded and IoT devices c) Specific expertise in gcc development toolchain and cross-compiling d) Strong experience in low level programming e) Long-term experience in Java/JavaFX programming for the work packages concerning control room applications and Java-based services. f) Good knowledge of ChartFX, visualisation tool g) Knowledge of standard developer tools like Eclipse and GIT h) Excellent knowledge of real-time equipment control software frameworks and their design and application for specific equipment integration, including middleware communication standards and frameworks in large-scale distributed control systems. Experience in the FESA framework used in example at CERN is highly desirable. i) Good knowledge of the SILECS framework and expertise to integrate generated PLC program code in UNICOS-generated PLC code. This is essential for integration of PLC systems and building a bridge to the FESA framework j) Profound knowledge of the UNICOS industrial controls framework used in example at CERN k) Experience with the White Rabbit timing system and technology l) Familiarity with the MIL-1553b field bus technology including low-level Linux drivers m) Experience in the development of real-time digital data acquisition systems in combination with the high-precision GMT system, based on the high-precision White-Rabbit based timing network. n) Long-term experience in projects executed in the research area, ideally accelerator facilities o) Basic VHDL knowledge p) Experience with Intel/Altera Quartus design suite as well as with Arria10 and MAX10 FPGA family and power sequencing- Berufliche Risikohaftpflichtversicherung
- VI. Proof of compulsory commercial/professional liability insurance (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Information about the insurance provider and the amount of coverage on the FAIR preprinted form
- Supply-Chain-Management
VII. Bidding consortium (Mit dem Teilnahmeantrag; Mittels Dritterklärung): BGB company with joint and several liability with listing of all members and their authorised representatives incl. naming of an authorised representative who shall represent the consortium in a legally binding manner vis-à-v … ganz lesenkürzer
VII. Bidding consortium (Mit dem Teilnahmeantrag; Mittels Dritterklärung): BGB company with joint and several liability with listing of all members and their authorised representatives incl. naming of an authorised representative who shall represent the consortium in a legally binding manner vis-à-vis the Contracting authority. The tender must be accompanied by a legally binding declaration signed by all joint members that the lead firm, as authorised representative, represents the joint members listed before the Contracting authority and is jointly and severally liable, having an effect on each member, for performing the service in accordance with the contract.- Sicherheit bei der Verarbeitung, Speicherung und Übermittlung von klassifizierten Informationen
- X. Declaration of compliance with data protection requirements (Mit dem Teilnahmeantrag; Mittels Eigenerklärung):
- Maßnahmen zur Sicherstellung der Qualität
- XI. Self-declaration of compliance with standards in the style of ISO 9001 (or equivalent standard) (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Respect standards in the style of ISO 9001
- Supply-Chain-Management
XVI. Sub-contractor Declaration (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Only to be completed if partial services are to be passed on to sub-contractors or if the applicant/bidder is using a sub-contractor to demonstrate suitability. In this case, this must be submitted with the request to … ganz lesenkürzer
XVI. Sub-contractor Declaration (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Only to be completed if partial services are to be passed on to sub-contractors or if the applicant/bidder is using a sub-contractor to demonstrate suitability. In this case, this must be submitted with the request to participate/the offer. A declaration of availability (see Declaration of Availability form) from the sub-contractor must also be submitted with the request to participate/the offer in case of hired competence. In case of partial performance by the sub-contractor, the declaration will be requested before the award of the contract.- Supply-Chain-Management
XVII. Declaration of Availability - Sub-contractor Declaration (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Only to be completed in parallel with the "Sub-contractor Declaration" and signed by the sub-contractor if partial services are to be passed on to sub-contractors (performance by sub-con … ganz lesenkürzer
XVII. Declaration of Availability - Sub-contractor Declaration (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): Only to be completed in parallel with the "Sub-contractor Declaration" and signed by the sub-contractor if partial services are to be passed on to sub-contractors (performance by sub-contractor) or if the applicant/bidder is using a sub-contractor to demonstrate suitability (hired competence - see Sub-contractor form). In the event that more than one sub-contractor is being used, several copies of this form should be filled out. One declaration of commitment should be submitted per sub-contractor.- Andere wirtschaftliche oder finanzielle Anforderungen
XVIII. Further bidder information - EU wide tendering procedures (so-called eForms) (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): In the context of the introduction of new stipulations for EU-wide tendering procedures (so-called eForms), public clients have been required since 25 October 2023 t … ganz lesenkürzer
XVIII. Further bidder information - EU wide tendering procedures (so-called eForms) (Mit dem Teilnahmeantrag; Mittels Eigenerklärung): In the context of the introduction of new stipulations for EU-wide tendering procedures (so-called eForms), public clients have been required since 25 October 2023 to publish the contractor information listed in any contract notices (previously contract award notices). Against this backdrop, must be provided for each bidder and each member of a bidding consortium the information listed on the relevant form with the proposal or the participation application in the case of a preliminary participation contest.- Nachreichen von Unterlagen
- Die Nachforderung von Erklärungen, Unterlagen und Nachweisen ist teilweise ausgeschlossen.
- Ausschlussgründe
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Vers … ganz lesenkürzer
Rein nationale Ausschlussgründe, Bildung krimineller Vereinigungen, Bildung terroristischer Vereinigungen, Geldwäsche oder Terrorismusfinanzierung, Betrug oder Subventionsbetrug, Bestechlichkeit, Vorteilsgewährung und Bestechung, Menschenhandel, Zwangsprostitution, Zwangsarbeit oder Ausbeutung, Verstöße gegen Verpflichtungen zur Zahlung von Steuern oder Abgaben, Verstöße gegen Verpflichtungen zur Zahlung von Sozialversicherungsbeiträgen, Verstöße gegen umweltrechtliche Verpflichtungen, Verstöße gegen sozialrechtliche Verpflichtungen, Verstöße gegen arbeitsrechtliche Verpflichtungen, Zahlungsunfähigkeit, Insolvenz, Einstellung der beruflichen Tätigkeit, Mit Insolvenz vergleichbares Verfahren, Schwere Verfehlung, Wettbewerbsbeschränkende Vereinbarungen, Interessenkonflikt, Wettbewerbsverzerrung wegen Vorbefassung, Mangelhafte Erfüllung eines früheren öffentlichen Auftrags, Täuschung oder unzulässige Beeinflussung des Vergabeverfahrens- Begrenzung der Bewerberzahl
- 3 bis … Bewerber
Laufzeit und Umfang3 von 6 angegeben
- Vertragsbeginn
- ?keine Angabe
- Vertragsende
- ?keine Angabe
- Dauer
- 24 Monate
- Verlängerung
- bis zu 1-mal: Foreseen contract period will be 24 month, but can be extended another 12 month
- Optionen
- ?keine Angabe
- Rahmenvereinbarung
- nein
Angebot und Einreichung7 von 9 angegeben
- Elektronische Einreichung
- Erforderlich
- Einreichung über
- dtvp.de
- Sprache
- Englisch
- Nebenangebote
- Nicht zulässig
- Mehrere Hauptangebote
- Nicht zulässig
- Elektronischer Katalog
- Nicht zulässig
- Bindefrist
- ?keine Angabe
- Angebotsöffnung
- ?keine Angabe
- Sicherheiten
- nicht verlangt
Ausführung7 von 8 angegeben
- Ausführungsbedingungen
Leistung: Supporting documents: - I. Participation - General declaration within the meaning of Section 126b (German Civil Code -BGB) (To be submitted with by means of self-declaration): General declaration of the person making the declaration within the meaning of Section 126b BGB. If the person ma … ganz lesenkürzer
Leistung: Supporting documents: - I. Participation - General declaration within the meaning of Section 126b (German Civil Code -BGB) (To be submitted with by means of self-declaration): General declaration of the person making the declaration within the meaning of Section 126b BGB. If the person making the declaration is not named in the request to participate, the request to participate will be deemed to have not been submitted. - IV. Self-declaration of suitability pursuant to Sections 123, 124 GWB (To be submitted with by means of self-declaration): Self-declaration of possessing the knowledge pursuant to Sections 123, 124 GWB is incorrect and that the cases mentioned therein do not apply - FAIR preprinted form - IX. Russia sanctions - Declaration on Regulation (EU) 833/2014 (To be submitted with by means of self-declaration): On 08.04.2022, the Council of the European Union adopted Regulation (EU) 2022/576 amending Regulation (EU) No 833/2014 concerning restrictive measures in view of R- Vertraulichkeit
- ?keine Angabe
- E-Rechnung
- Erforderlich
- Elektronische Bestellung
- wird genutzt
- Elektronische Zahlung
- wird genutzt
- Vorbehaltene Ausführung
- Nein
- Strategische Beschaffung
- Erfüllung sozialer Zielsetzungen
- EU-Mittel
- Auftragsvergabeprojekt nicht aus EU-Mitteln finanziert
Rechtsschutz3 von 3 angegeben
- Nachprüfungsstelle
- Vergabekammer des Bundes, Villemomblerstr. 76, 53123 Bonn
- Fristen für Nachprüfungsanträge
The competent reviewing authority is Vergabekammer des Bundes [transl.: Federal Public Procurement Tribu-nal] Villemombler Straße 76 53123 Bonn Tel.: 0228 9499-0 Fax: 0228 9499-163 Email: vk@bundeskartellamt.bund.de Website: http://www.bundeskartellamt.de/SharedDocs/Kontaktdaten/DE/Vergabekammern.h … ganz lesenkürzer
The competent reviewing authority is Vergabekammer des Bundes [transl.: Federal Public Procurement Tribu-nal] Villemombler Straße 76 53123 Bonn Tel.: 0228 9499-0 Fax: 0228 9499-163 Email: vk@bundeskartellamt.bund.de Website: http://www.bundeskartellamt.de/SharedDocs/Kontaktdaten/DE/Vergabekammern.html Candidate/ Bidder is requested to clearly identify those sections of the participa-tion application (and eventually of the tender, if applicable) that contain a trade or business secret. If Bidder fails to do so, the Public Procurement Tribunal may, in the case of a review procedure, assume that Bidder has agreed to have these documents inspected (§165 para. 3 GWB). As Awarding Authority, FAIR is obliged to make the tender file available to the Public Procurement Tribunal immediately when initiating a review procedure (§ 163 para. 2 cl. 3 GWB). Candidates/ Bidders have a right to expect the contracting authority's compliance with the Bidder-protecting provisions re: the tender procedure (§ 97 para. 6 GWB). If Candidate/ Bidder interested in the contract considers that Bidder's rights have been infringed through failure to comply with award regulations, the infringement must be reported to FAIR within ten calendar days (§ 160 para. 3 cl. 1 nr. 1 GWB). Infringements identifiable on the basis of the announcement or the award doc-uments must be asserted against FAIR within the deadline for submission of ap-plications (or tenders) specified in the announcement (§ 160 para. 3 cl. 1 nr. 2 - 3 GWB). If FAIR informs Candidate/ Bidder that FAIR is unwilling to redress its complaint, it is possible to file an appeal for review with the aforementioned Public Procure-ment Tribunal within 15 days of receipt of the notification (§ 160 para. 3 cl. 1 nr. 4 GWB). Bidders whose tenders are not to be considered for the award will be informed prior to the award according to § 134 GWB. A contract may only be concluded 15 calendar days after this information has been sent by FAIR. In the case of trans-mission by fax or electronic means, this period shall be ten calendar days. It commences on the day after dispatch of the information by FAIR. After this peri-od has expired, a surcharge is possible, even if the deadline is not passed accord-ing to § 160 para. 3 GWB. An application for review would therefore have to be delivered to FAIR by the Public Procurement Tribunal before the expiry of the deadline according to § 134 GWB in order to prevent a surcharge. According to § 135 para. 1 and 2 GWB, the ineffectiveness of a commission can only be established if it has been asserted in the review procedure within 30 cal-endar days of the conclusion of the contract but not later than six months after the conclusion of the contract. If the contracting entity has published the award in Amtsblatt der Europäischen Union [transl.: Official Journal of the European Union], the period unenforceability shall end 30 calendar days after announce-ment of the publication of the award in Amtsblatt der Europäischen Union. Information pursuant to Art. 13 GDPR on the processing of your personal data within the scope of our business relationship is available at: www.gsi.de/data-protection- Beschaffungsübereinkommen (GPA)
- fällt darunter
Zusätzliche Informationen2 von 2 angegeben
- Hinweis
- #Besonders auch geeignet für:selbst#
- Hinweis
- #Bekanntmachungs-ID: CXS0YYEYTSHUKT9Z# The evaluation of the offers will be proceeded according to price quotient method. 30% price / 70% criteria The criteria and other conditions are laid out in detail within the document "special application conditions"
Keine Angabe passt zu diesem Suchbegriff.
Bezeichnungen aus den amtlichen eForms-Codelisten (EU und eForms-DE). Maßgeblich sind die Vergabeunterlagen.
AuftraggeberZur Seite der Vergabestelle
- Anschrift
- Planckstr. 1, 64291 Darmstadt
- Website
- fair-center.de
- Kontakt
- kein Funktionspostfach angegeben, siehe Originalbekanntmachung
Bei uns erfasst
- Supervision Frankreich29.10.2026
- Switchable Beam Dump27.10.2026 · 1 Angebot
- LITE TLD Reader14.10.2026 · 1 Angebot
- Straight Vacuum Chambers for the HEBT System13.10.2026 · 12 Angebote
Mehr von FAIR - Facility for Antiproton and Ion Research in Europe GmbH
- Mettler XPR2U microbalanceFAIR - Facility for Antiproton and Ion Research in Europe GmbH · DarmstadtFrist 30.11.2026
- Rahmenvertrag für Montage- und Transportdienstleistungen zur Installation von SFRS-KomponentenFAIR - Facility for Antiproton and Ion Research in Europe GmbH · 64291 DarmstadtFrist 10.11.2026
- Compressed Air Components for FAIRFAIR - Facility for Antiproton and Ion Research in Europe GmbH · DarmstadtFrist 24.11.2026
- Hand-Foot-Clothing-Monitors FAIR BSAFAIR - Facility for Antiproton and Ion Research in Europe GmbH · DarmstadtFrist 10.11.2026
Alle 4 offenen Ausschreibungen von FAIR - Facility for Antiproton and Ion Research in Europe GmbH, dazu Zuschläge und Auftragnehmer
Marktumfeldvon uns ausgewertet
Vergabemeldungen der letzten 24 Monate mit Hauptgegenstand CPV 429 (Maschinen für allgemeine und besondere Zwecke) in Hessen. Abgeleitet aus veröffentlichten Bekanntmachungen, keine amtliche Statistik. Zuschlagswerte unter 1.000 € zählen wir als Platzhalter nicht mit.
Mehr Marktdaten, Vergabestellen und offene Ausschreibungen: Labor- und Messgeräte in Hessen (9 offen)
Häufige Zuschlagsempfänger
- CSR Maschinenbau GmbH3 Zuschläge
- Modula GmbH3 Zuschläge
- ILK Dresden2 Zuschläge
Preise und WettbewerbPremium
Verlauf des Verfahrens2 Meldungen
- BekanntmachungFrist 12.01.2026
- 1. Berichtigung (diese Seite) · Informationen sind jetzt verfügbarFrist von 12.01.2026 auf 16.01.2026 verschoben
Berichtigte Fassungen bleiben aufrufbar. Die Suche zeigt je Verfahren nur die aktuelle.
Ähnliche offene Ausschreibungen
- Neuausstattung einer HausdruckereiMärkischer Kreis - Der LandratFrist 30.11.2026
- humanoider RoboterBrandenburgische Technische Universität Cottbus-SenftenbergFrist 20.11.2026
- manueller WafermounterIHP GmbH - Leibniz-Institut für innovative MikroelektronikFrist 26.11.2026
- Planung, Lieferung u. Inbetriebnahme eines Vakuumbandfilters für den BioCampus MultiPilot (BMP)Zweckverband Hafen Straubing-SandFrist 08.12.2026
- Lieferung von dentalen Geräten und Arbeitsstühlen für die überbetriebliche Ausbildung im Zahntechniker-HandwerkZahntechniker-Innung DüsseldorfFrist 10.12.2026
- Baugruppen Fertigung und VormontageBundesdruckerei GmbHFrist 01.12.2026
Quelle: Bekanntmachungsservice des Bundes (oeffentlichevergabe.de), Lizenz CC0. Stand der Daten: 02.11.2026. Maßgeblich ist allein die Originalbekanntmachung. Kennung 7ee14b3e-5d26-4bcd-82c4-778124b8611c.